Wifi not working on Android How to fix it?

Having a reliable Wi-Fi connection is essential for staying connected and accessing the internet on your Android device. However, encountering Wi-Fi connectivity issues can be frustrating and disrupt your online activities. This guide will explore common causes of Wi-Fi problems on Android devices and provide troubleshooting steps to help you resolve them. From simple solutions like restarting your device to more advanced techniques like adjusting network settings and updating firmware, this guide will assist you in getting your Wi-Fi connection up and running smoothly again.

Fix Wifi not working on Android

Fix Wifi not working on Android

Restart your device:

Start by turning off your Android device completely. Leave it off for a few seconds, and then power it back on. Sometimes a simple restart can resolve temporary software glitches.

Toggle Wi-Fi:

Swipe down from the top of your screen to access the notification panel and locate the Wi-Fi icon. Tap on it to turn off Wi-Fi, wait for a few seconds, and then tap it again to turn it back on. Alternatively, you can also go to Settings > Wi-Fi and toggle the switch off and on.

Check Airplane Mode:

Ensure that Airplane Mode is turned off. When enabled, it disables all wireless connections on your device, including Wi-Fi. You can find Airplane Mode in the notification panel or in the Settings menu.

Verify Wi-Fi network settings:

Go to Settings > Wi-Fi and make sure that Wi-Fi is turned on. Select your Wi-Fi network and tap “Forget” to remove the network from your device. Then, reconnect by selecting the network again and entering the password if required.

Restart your router:

Sometimes the issue might be with your router. Turn off your router, wait for about 10 seconds, and then turn it back on. Allow a few minutes for the router to initialize, and then check if your Android device can connect to the Wi-Fi network.

Check Wi-Fi signal strength:

Ensure that you are within range of your Wi-Fi router. If you’re too far away, the signal may be weak, causing connection issues. Move closer to the router and see if the Wi-Fi connection improves.

Forget network settings:

If you’re still experiencing issues, you can try forgetting all saved Wi-Fi networks on your device. Go to Settings > Wi-Fi, tap on the network you’re having trouble with, and select “Forget” or “Forget Network.” Repeat this for all saved networks. Then, reconnect to your Wi-Fi network and enter the password.

Disable battery-saving modes:

Some battery-saving modes or power-saving features can interfere with Wi-Fi connectivity. Check if any power-saving modes are enabled on your device and disable them temporarily to see if it resolves the issue.

Update Android and apps:

Make sure your Android device is running the latest software updates. Outdated software can sometimes cause compatibility issues. Additionally, update any relevant apps, including the Wi-Fi or network-related apps, from the Google Play Store.

Reset network settings:

If none of the above steps worked, you can try resetting your network settings. Go to Settings > System (or System & Updates) > Reset > Reset Wi-Fi, mobile & Bluetooth. Confirm the action and restart your device. Note that this will remove all saved Wi-Fi networks, Bluetooth pairings, and mobile network settings.

Safe mode:

Restart your Android device in safe mode to check if any third-party apps are causing conflicts with your Wi-Fi. Press and hold the power button, then tap and hold the “Power off” option until you see the safe mode prompt. Select “OK” or “Restart in safe mode.” If Wi-Fi works fine in safe mode, a third-party app may be the cause. Uninstall recently installed apps to identify the problematic ones.

Phone hardware issue:

If you suspect that your Android device has a hardware issue affecting Wi-Fi connectivity, here are a few steps you can take to troubleshoot the problem:

  • Restart your device: A simple restart can sometimes resolve temporary hardware glitches. Turn off your Android device, wait a few seconds, and then turn it back on.
  • Remove and reinsert the SIM card: In some cases, a loose or improperly inserted SIM card can cause connectivity issues. Power off your device, remove the SIM card and reinsert it securely. Then turn your device back on and check if the Wi-Fi connection improves.
  • Check for physical damage: Inspect your Android device for any visible physical damage, such as a cracked screen or water damage. Physical damage can affect the internal components, including the Wi-Fi module. If you find any damage, it’s best to contact your device manufacturer or visit a service center for repair options.
  • Test Wi-Fi on different networks: Try connecting to different Wi-Fi networks to determine if the issue is specific to a particular network or if it occurs on all networks. If the problem persists across multiple networks, it suggests a device-specific hardware issue.
  • Perform a factory reset: As a last resort, you can try performing a factory reset on your Android device. This will erase all data, so make sure to back up important files and contacts beforehand. Go to Settings > System (or System & Updates) > Reset > Factory data reset. Follow the on-screen instructions to complete the reset process. Afterward, set up your device again and check if the Wi-Fi issue is resolved. Note that a factory reset should only be done if all other troubleshooting steps have been exhausted.

If the hardware issue persists despite these troubleshooting steps, it’s recommended to contact your device manufacturer’s support or visit a service center for further assistance. They can provide specialized guidance and diagnose any specific hardware problems with your Android device.

Factory reset:

If all else fails, you can perform a factory reset as a last resort. This will erase all data on your device, so make sure to back up important files and contacts beforehand. Go to Settings > System (or System & Updates) > Reset > Factory Data Reset. Select “Reset phone” or “Erase all data” and follow the on-screen instructions to complete the process. After the factory reset, set up your device again and check if the Wi-Fi connectivity issue has been resolved.

Disable Mac filtering:

If you suspect that MAC filtering is causing Wi-Fi connection issues on your Android device, you can disable it to allow unrestricted access. MAC filtering is a feature that limits the number of devices that can connect to a network based on their unique MAC addresses. To turn off MAC filtering, follow these steps:

  1. Access the router’s settings: Open a web browser on a device connected to the Wi-Fi network, and enter your router’s IP address in the address bar. Standard IP addresses for routers are or If you’re unsure about the IP address, refer to your router’s documentation or contact your router manufacturer.
  2. Log in to the router: You will be prompted to enter the router’s login credentials. Enter the username and password for the router’s administration interface. If you haven’t changed them before, the default username and password can usually be found in the router’s manual or on the manufacturer’s website.
  3. Locate the MAC filtering settings: The location of the MAC filtering settings may vary depending on your router’s interface. Look for options like “Wireless Settings,” “MAC Address Filtering,” or “Access Control.” It might be listed under the Wi-Fi or security settings.
  4. Disable MAC filtering: Once you find the MAC filtering settings, you should see an option to enable or disable it. Disable MAC filtering by selecting the appropriate option or unchecking the box related to MAC filtering. Save the changes if prompted.
  5. Restart the router: After disabling MAC filtering, it’s a good practice to restart your router. Power it off, wait for a few seconds, and then power it back on. This will ensure that the changes take effect.
  6. Reconnect your Android device: On your Android device, go to the Wi-Fi settings and look for your Wi-Fi network. Connect to the network by entering the Wi-Fi password if required. Your Android device should now be able to connect to the Wi-Fi network without any MAC filtering restrictions.

Disabling MAC filtering removes the restriction on specific devices, allowing all devices, including your Android device, to connect to the Wi-Fi network. If the Wi-Fi problem persists even after disabling MAC filtering, you may need to further troubleshoot your network or consider contacting your router manufacturer or internet service provider for assistance.

If none of these steps solve the problem and your Wi-Fi still isn’t working on your Android device, it’s recommended to contact your device manufacturer’s support or visit a service center for further assistance. They can provide specialized guidance and help diagnose any hardware-related issues.

Remember, troubleshooting steps may vary slightly depending on your Android device model and software version, but the general principles remain the same.


How do I reset my network settings Android phone?

The steps to reset network settings on an Android phone may vary slightly depending on the device and Android version. However, the following instructions should generally work:

1. Open the Settings app on your Android phone. You can usually find it in the app drawer or by swiping down from the top of the screen and tapping the gear icon.

2. Scroll down and select “System” or “System & Updates.”
3. Look for an option like “Reset” or “Reset options” and tap on it.
4. Depending on your device, you may see different reset options. Look for “Reset Wi-Fi, mobile & Bluetooth” or a similar option.
5. Read the warning message that appears and confirm that you want to reset the network settings.
6. Your phone will now reset the network settings, which may take a moment. After the process, your phone’s network settings will be restored to their default values.
7. Restart your Android phone.

It’s worth noting that resetting network settings will remove saved Wi-Fi networks, Bluetooth pairings, and VPN configurations. You’ll need to reconnect to Wi-Fi networks and reconfigure any custom network settings after the reset.

If you’re experiencing a specific network issue on your Android phone, providing more details about the problem can help me provide more targeted assistance.

How do I fix my Wi-Fi without Internet access?

To fix Wi-Fi without internet access:
1. Restart your router and device.
2. Forget and reconnect to the Wi-Fi network.
3. Check network settings (disable Airplane Mode, enable Wi-Fi).
4. Disable any unnecessary proxy settings.
5. Reset network settings as a last resort.
6. Contact your ISP if the issue persists.

How do I update my Wi-Fi driver?

To update your Wi-Fi driver:
1, Identify your Wi-Fi adapter manufacturer and model.
2. Visit the manufacturer’s website.
3. Look for the “Support” or “Downloads” section.
4. Locate the latest driver for your specific Wi-Fi adapter.
5. Download the driver file to your computer.
6. Run the downloaded file and follow the on-screen instructions to install the updated driver.
7. Restart your computer after the installation is complete.

Note: Alternatively, you can also use third-party driver update software to automatically scan and update your Wi-Fi driver. However, exercise caution when using such software and ensure that you download it from a trusted source.

What is a Wi-Fi router adapter?

A Wi-Fi router adapter is not a standard term or component. It might be a phrase used to refer to a Wi-Fi adapter that connects to a router, allowing the router to establish a wireless network. However, it’s more commonly known as a Wi-Fi network card or Wi-Fi adapter.

A Wi-Fi network card or adapter is a hardware component that enables a computer or device to connect to a wireless network. It provides wireless communication capabilities by transmitting and receiving Wi-Fi signals. These adapters can be internal (PCI-E or M.2 cards) for desktop computers or external (USB dongles) that can be plugged into a USB port on both desktops and laptops.

In summary, a Wi-Fi router adapter is likely a term referring to a Wi-Fi adapter used in conjunction with a router to establish a wireless network connection.

Related Contents:

Leave a Comment